Head_L Head_R
Request a Quoatation

Side Top
  Site Map
  About HM Wire
  Glossary of Terms
  Testing Information
  Bare Wire Dimmension Chart

  ~out sister site~

Choose a Language

powered byGoogle Logo

Search HMWire.com:
enhanced by:Google Logo
Get Adobe Reader Now

RoHS and WEEE Compliance

Side Bottom

Modified Polyester-amide / Polyimide

Shippingbox Top Left Shippingbox Center TOp Shippingbox Top Right
Shippingbox Bottom Left Shippingbox Center Bottom Shippingbox Bottom Right

Insulation Characteristics

Modified Polyester-imide/Polyamide consists of a nylon topcoat over a solderable, high temperature modified polyester-imide. The solder stripping characteristic of the composite has been optimized for processing in a solder pot at 850° - 950°F. Physical properties are adequate for most coil applications. More severe winding requirements such as in-slot stator winding are not recommended without thorough evaluation. The electrical properties are influenced slightly by the hygroscopic nature of the nylon topcoat.

    General Applications

    Modified Polyester-imide/Polyamide is designed for those special coil applications where solderability is coupled with a need for high thermal resistance. The application potential for this insulation is enhanced by the addition of the polyamide overcoat to the high temperature modified polyester basecoat.

    • Automotive coils
    • Shaded pole motor coils
    • Special control coils

Footer Box Top
Home | Site Map | Links | Legal | About
Phone: 330-244-8501 | Fax: 330-244-8561
PO Box 9181 Canton, Ohio 44711
Copyright © 2007 HM Wire International, Inc. All Rights Reserved.
Site Design and Maintained by HmDesigns
Footer Box Bottom
Left Footer
Version 4.3.2
Right Footer