Head_L Head_R
Request a Quoatation

Side Top
  Site Map
  About HM Wire
  Glossary of Terms
  Testing Information
  Bare Wire Dimmension Chart

  ~our sister site~

Choose a Language

powered byGoogle Logo

Search HMWire.com:
enhanced by:Google Logo
Get Adobe Reader Now

RoHS and WEEE Compliance

Side Bottom

Solderable Polyester

Shippingbox Top Left Shippingbox Center TOp Shippingbox Top Right
Shippingbox Bottom Left Shippingbox Center Bottom Shippingbox Bottom Right

Insulation Characteristics

Modified Polyester-imide is produced by insulating the conductor with a single coat of a solder-strippable modified polyester resin. Physical properties are adequate for most coil applications. More severe winding requirements such as in-slot stator windings are not recommended without thorough evaluation. This film may be readily stripped from the conductor by immersing in an 850° - 950°F solder pot; care must be exercised in preventing the film from over-cutting due to poor immersion techniques.

    General Applications

    Modified Polyester-imide is designed for those special coil applications where solderability is coupled with a need for high thermal resistance. It is not recommended for in-slot motor windings or applications subject to high winding stresses.

    • Automotive coils
    • Electronic coils
    • Shaded pole motor coils
    • Special transformer coils

Footer Box Top
Home | Site Map | Links | Legal | About
Phone: 330-244-8501 | Fax: 330-244-8561
PO Box 9181 Canton, Ohio 44711
Copyright © 2007 HM Wire International, Inc. All Rights Reserved.
Site Design by HmDesigns
Footer Box Bottom
Left Footer
Version 4.3.2
Right Footer