Head_L Head_R
     
   
 
Request a Quoatation

Side Top
  Home
  Site Map
  About HM Wire
  Glossary of Terms
  Testing Information
  Bare Wire Dimmension Chart

  www.litz-wire.com
  ~out sister site~

Choose a Language

powered byGoogle Logo

Search HMWire.com:
 
enhanced by:Google Logo
Get Adobe Reader Now

RoHS and WEEE Compliance

Side Bottom

Carbon Steel Alloy 401 - Chrome Silicon

Shippingbox Top Left Shippingbox Center TOp Shippingbox Top Right
 
 
Shippingbox Bottom Left Shippingbox Center Bottom Shippingbox Bottom Right

Carbon Steel Alloy 401 Composition

C 0.51 - 0.59%, Cr 0.60 - 0.80%, Si 1.20 - 1.60%

    Carbon Steel Alloy 401 Description

    This material is designed for springs that must withstand considerable shock and extreme heat. Chrome silicon can be used at temperatures up to 50°F higher than chrome vanadium. Recommendations for heat treatment: Immediately after coiling, the springs should be stress relieved at about 400°C (750°F) for 30 minutes. After shot peening, the springs should be stress relieved at about 250°C (480°F) for 30 minutes. Wire is available in size ranges from 0.018" - 0.625". Commercial quality Chrome Silicon conforms to ASTM-A-401

    Carbon Steel Alloy 401 Applications

    Design Engineers use Chrome Silicon for shock loads and moderately elevated temperatures. Cold drawn and heat treated before fabrication.


 
 








Footer Box Top
 
Home | Site Map | Links | Legal | About
Phone: 330-244-8501 | Fax: 330-244-8561
PO Box 9181 Canton, Ohio 44711
Copyright © 2007 HM Wire International, Inc. All Rights Reserved.
Site Designed and Maintained by HmDesigns
 
Footer Box Bottom
 
Left Footer
Version 4.3.2
Right Footer